Clearance & Marker Lamps
-
2 1/2" Surface-Mount Single-Bulb Clearance / Marker Lamp
• Red, Polypropylene / Acrylic
• 12,000+ hour bulb
• Snap-on lens for easy bulb replacement
• Heavy-duty 2 -
2 1/2" Clearance / Marker Lamp
• Red, Polycarbonate / Acrylic
• Hermetic lens to housing seal
• Twist-on mounting for easy installation
• Fits all popular mountings and grommets
• 12-volt version features aOut of stock -
Clearance / Marker Lamp
• Red, Polycarbonate
• Hermetic lens to housing seal
• 12-volt version features a 12,000+ hour bulb
• Uses double-seal UBS pigtail
• Rectangular shape fits narrow applications
• Meets PCOut of stock -
Two-Bulb Square-Corner Clearance / Marker Lamp
• Amber, Polypropylene / Acrylic
• Corrosion-resistant contacts
• Snap-on lens for easy bulb replacement
• Attached blunt cut pigtail
• Meets PC function only when mounted at aOut of stock -
SuperNova LED Clearance / Marker Lamp
• Amber Lens, Yellow Body, Polycarbonate
• Sealed marker lamp
• Encapsulant potting for total circuit-board protection
• Thin-Line design fits narrow rails and channels
• Uses UBS double-seal -
SuperNova® LED Clearance / Marker Lamp
• Red, Polycarbonate
• Encapsulant potting for total circuit board protection
• Hermetic lens to housing seal
• Advanced pin connection system
• Uses same UBS pigtail as incandescent -
SuperNova® Low-Profile LED Clearance / Marker Lamp
• Amber, Polypropylene, Stainless-Steel
• Encapsulant potting for total circuit board protection
• Sealed hard-wire terminations with .180 molded, UBS slim line bullets
• Field replaceable lens
MicroNova LED Clearance / Marker Lamp
• Red w/Chrome Bezel, Polycarbonate / ABS
• Low profile makes lamp less susceptible to damage
• Small size fits in narrow applications
• Hermetic lens-to-housing seal
• Encapsulant
15" Thin-Line LED Bar Lamp
• Red, Polycarbonate
• Rated to 100,000 hours of serivce life
• Sealed marker lamps are shock- and vibration-resistant
• Impact-resistant housing is sealed for moisture protection
Oval Torsion Mount III Side Turn/Marker Lamp
• Amber, Polycarbonate
• Torsion Mount® III, Gel-Mount® bulb cradle design minimizes bulb vibration
• Extended dome for added visibility from front and rear
• Fits standard
Sentry Sealed Marker/Side Turn Lamp
• Amber, Black Base, Polycarbonate
• High-impact base
• Uses male pin connection; accepts UBS pigtail
• Not recommended for rear of vehicles in padded dock applications
• Sentry lamp
Sealed Turtleback II Clearance / Marker Lamp - ABS
• Amber, Polycarbonate / Acrylic
• Shock-absorbing, heat-resistant lens and lamp base
• Hermetic lens-to-housing seal
• Waterproof male pin connections accept UBS pigtail
• Turtleback®Out of stock
Hi Count Turtleback II LED Lamp-Red
• Polycarbonate / Acrylic
• Hermetic lens to housing seal
• Molded bullet with chassis ground-ring terminal connection
• Shock absorbing, heat-resistant lens and
TRUCK-LITE SIGNAL STAT MARKER/CLEARANCE LIGHT - CLEAR
• P2, 2 Screw, Hard-Wired, Stripped End, 12V
• Vulcanized Black Rubber Housing, Aluminum BaseOut of stock
TRUCK-LITE 19 SERIES LED MARKER/CLEARANCE LAMP - RED
• P2, Male Pin, 12V, Leds Designed At 14V, .05 Amp
• Must Be Mounted Horizontally
TRUCK-LITE 22 SERIES DUAL-CONTACT MARKER/CLEARANCE LIGHT - AMBER
• Single Bulb, Side/Turn Signal 2 Screw, 12V, PL-3, P2
• Rectangular Sealed Polycarbonate Lens & Housing
TRUCK-LITE 26 SERIES INCANDESCENT OVAL MARKER/CLEARANCE LAMP - AMBER
• 12V 2 Bulb, P2, 2-Screw, Hard Wired, Stripped End
• Snap-In Acrylic Lens, Two #194 Wedge Base Bulbs
TRUCK-LITE 26 SERIES INCANDESCENT MARKER/SIGNAL LIGHT - AMBER
• 12V Round Single Bulb, Stainless Steel Housing, Acrylic Lens
• P2, 2 Screw Mount, Hard Wired, Stripped End
TRUCK-LITE 33 SERIES LED ID LIGHT ASSEMBLY KIT - RED
• 12V, 5 Lights, Round Polycarbonate Lens And Housing
• PVC Grommet, Nylon Flange, Requires 3/4'' Mounting Hole
TRUCK-LITE LED 35 SERIES MARKER/CLEARANCE LIGHT KIT - RED
• Rectangular, P2, 2 Screw, Fit 'n Forget, Horizontal Mount
• 12V, .180 Bullet Terminal/Ring Terminal
PETERSON 2" LED AUXILIARY TUNNEL LIGHT W/3D ILLUSION-AMBER
• Mirror look when off, 3D tunnel effect when on
• Compatible with 2" and 2.5" chrome bezels
Two-Bulb No-Splice Clearance Marker Light-RED
• Exclusive, no-splice wiring system
• Exclusive, internal armor for additional protection
• Standard snap-on lens for easy bulb replacement
• Meets PC function when
SuperNova 2" LED Clearance Marker Light-AMBER
• Hermetic lens-to-housing seal
• Fits all popular mountings and grommets
• Fully sealed electronics using encapsulant potting
• Meets PC function when mounted
Clearance Marker Light-RED
• Brass ground eyelet, compact design
• Snap-on lens for easy bulb replacement
• Voltage Amp: 12V / .27A
• Material: Polycarbonate/Polypropylene
Clearance Marker Light-RED
• Brass ground eyelet, compact design
• Snap-on lens for easy bulb replacement
• Voltage Amp: 12V / .27A
• Material: Polycarbonate/Polypropylene
15" Thin-Line 3-LED Light Bar-RED
• Rated to 100,000 hours of service life
• Sealed marker lamps are shock and vibration-resistant
• Impact-resistant housing is sealed for moisture protection
Dual Intensity MicroNova Dot LED Marker Light-RED
• Hermetic lens-to-housing seal
• Dual Intensity allows for better visibility
• Sleek aerodynamic styling, small size fits in narrow applications
• Encapsulant
Cab Marker With Shield 2 Bulb 1 Wire-Red
• 5.25" x 4.68" Chrome Plated Shield
5180 Series Incandescent Marker-RED
• 3.5" x 1.5" Acrylic Lens
• Built in shield with plugOut of stock
Sound Off Signal 120 Series 4" LED Marker Light-Red
• PC/P2 rated combination clearance and marker lights are perfect for front and rear corner mounting
• Light includes neoprene gasket,HD TRUCK/BUS/POLICE/FIRE/EMS