License & Backup
-
License Backup Replacement Lense-Clear
• Thickness: 4.11" (104.52mm)
• Diameter: 0.95" (24.25mm) -
GROTE RESEALABLE LICENSE LAMP
• Compact license lamp protrudes less than 2"
• Housing snaps firmly into molded o-ring -
Grote Select™ 4" Dual-System LED Backup Lamp
• Female-Pin
• Clear, ABS/Acrylic
• Fits standard 4" lamp grommets and brackets
• Hermetically sealed lamp prevents water intrusion
• Requires two lamps to meet backup function
PETERSON LED TOP MOUNT LICENSE LIGHT
• Single Diode, 9-16 Volt Operating Range
MAXXIMA LED LICENCE LIGHT
• 12.8vdc, Amp Draw 70ma
• 2 Leads Blunt Cut, 4"
MAXXIMA LOW PROFILE THIN OVAL SURFACE MOUNT BACKUP LIGHT - WHITE
• Voltage: 12.8 VDC, Amp Draw 245 Milliamps
• 2-Wire 6" Leads
TRUCK-LITE 36 SERIES RECTANGULAR LED LICENSE LIGHT - CLEAR/WHITE
• 12-24V, .180 Bullet, Hardwired, Rear Exit Wires
• Polycarbonate Lens And Housing, Adhesive Mount
TRUCK-LITE LED SUPER 44 BACK/UP LIGHT - WHITE/CLEAR
• 12V Round, Fit 'n Forget S.S., Black Flange Mount
• Polycarbonate Lens And Housing
SuperNova NexGen 4" Dual-System LED Backup Light
• Hard Shell, ABS/Acrylic
• Fits standard 4" lamp grommets and brackets
• Hermetically sealed lamp prevents water intrusion
• Requires two lamps
4" Torsion Mount II Dual-System Backup Light
• Hermetic lens-to-housing seal
• Requires two lamps to meet backup function
• Gel-Mount® bulb cradle design
Great White 2 Diode LED License Light
• Durable, low-draw LED design with hardwired leads & metal base.
• Specially-designed optics for optimal light dispersal.
• Single unit meets DOT
4" Surface Mount 5 Diode LED License Light
• Chrome finish ABS plastic hood, polycarbonate lens
• Hard wired design includes both lead and ground wire
• Dimension: 4”?? x
Courtesy Lamp
• Chrome plated steel housing
• Single-bulb unit
Out of stock
2" LED Interior Courtesy Lamp
• White Polycarbonate
• Bright, single LED provides ample light for tool boxes, cabinets and other hard to light areas
• Encapsulant potting for total circuit board protection
TRUCK-LITE 33 SERIES LED LICENSE LIGHT - CLEAR
• 12V, .180 Bullet, Hardwired, For 1-2/16" Hole
• Round Polycarbonate Lens & Housing
6” 27 LED Oval Sealed Clear DOT Back-Up Light
• Certified for back-up light function when installed as pair in two-lamp system
• Accept standard two-pin plugs
• Polycarbonate
6" Oval LED Back-Up Light Grommet Mount-Clear
• Specially engineered lens to boost light output and brightness
• Sonic welded, waterproof construction
• Lens with UV inhibitor prevents sun fadeHD TRUCK/BUS/POLICE/FIRE/EMS
GROTE 2.5" RECTANGULAR LED UTILITY LIGHT-WHITE
• Encapsulant potting for total circuit-board protection
• Uses same UBS pigtails as incandescent for a quick Plug-and-Go retrofit
GROTE DOME INTERIOR/UTILITY LIGHT-CLEAR
• Hooded guard to reduce glare
• Low power consumption and heat production
• Steel Chrome Plated/Polycarbonate
PETERSON 2-1/2" LED UTILITY & LICENSE LIGHT w/PLUG
• Single Diode, 9-32 volt operating range
• 2-wire female plug for easy installation
TRUCK-LITE 15 SERIES LICENSE LIGHT KIT - CLEAR/WHITE
• PL-10, 12V, Incandescent Bulb, Snap-Fit Mount
• Gray Bracket May Be Surface Mounted
PETERSON LED TOP MOUNT LICENSE LIGHT w/SPACER
• Single Diode, 9-16 Volt Operating Range
• 0.95″ Spacer For Use As Top Mount License Light
MAXXIMA 7" BACK UP BUS LIGHT - WHITE
• 7.7 - 14.0 VDC, Amp Draw White 280ma
• 2-Wire Lead Connector
TRUCK-LITE RECTANGULAR BACK-UP LIGHT - CLEAR
• Sealed Polycarbonate Lens And Housing
• 4 Screw Bracket Mount, Socket Assembly
TRUCK-LITE 15 SERIES LICENSE LIGHT KIT - WHITE/CLEAR
• PL-10, 12V, Incandescent Bulb, Snap-Fit Mount
• Gray Bracket May Be Surface Mounted
TRUCK-LITE 26 SERIES INCANDESCENT LICENSE LIGHT - CLEAR
• 12V Single Bulb, Chrome 2-Screw Bracket Mount
• Rectangular, Hardwired, Stripped End
TRUCK-LITE 26 SERIES INCANDESCENT LICENSE/COURTESY LIGHT
• 12V Single Bulb, Round, Chrome/Brass Grommet Mount
• Polycarbonate Lens, Hard Wired, .180 Bullet
TRUCK-LITE SIGNAL-STAT INCANDESCENT LICENSE ILLUMINATOR - WHITE/CLEAR
• 12V, Triangular Single Bulb, Hardwired, Stripped End
• 2-Screw Gray ABS Bracket Mount, Polycarbonate Lens
4" Torsion Mount® II Single-System Backup Lamp
• Female Pin
• Clear, Polycarbonate
• Torsion Mount® II Gel-Mount® bulb cradle design
• Meets backup function with single-lamp system
• Hermetic lens-to-housing seal
MAXIMMA 4" LED ROUND BACK UP LIGHT -WHITE
• 12.8vdc, Amp Draw: 300ma
• 2 Blunt Cut Leads 12"