Pigtails, Sockets & Equalizers
-
Stop / Tail / Turn Three-Wire 90º Plug-In Pigtails for Male Pin Lamps
• 11" Long, Chassis Ground, 90° Plug, Blunt Cut Wires
• Dual function for S / T / T -
Adapter Plug for Hard-Shell Connector
• 6" Long, Hard-Shell to Male-Pin Connector
• For use with 4" round and oval S / T / T lamp -
Two-Wire Plug-In Pigtails for Female-Pin Lamps
• 10 1/4" Long, Chassis Ground, Standard .180 Male
• Single function
• Factory-molded plugs for use with ULTRA-BLUE-SEAL® trailer wiring system
• Includes dummy pin to helpOut of stock -
PETERSON SINGLE LEAD AMP-PACKARD PLUG
• Adapter plug connects single wire back-up light or strobe
sync function to Packard-style harness connections -
PETERSON SINGLE LEAD AMP PLUG w/8" LEADS
• Connects sync wire on 860SA, 861SA, 866SA and 867SA
series multi-function LED strobesOut of stock -
PETERSON 9" WEATHER-PAK TURN SIGNAL PLUG
• 3-Wire Hard Shell, Weather Proof Design
• Replacement plug for 344 turn signal lightsOut of stock -
HEADLIGHT & TURN SIGNAL WIRING HARNESS KIT
• Replace Front PS & DS Socket AssembliesFreightliner Trucks -
TRUCK-LITE RIGHT ANGLE STOP/TAIL/ TURN PLUG
• 16GA GPT Wire, Female PL-3, Right Angle PL-3/Right Angle PL-3, 18"
• Y Adapter Accommodates Two Additional Side Markers -
TRUCK-LITE RIGHT ANGLE STOP/TURN/TAIL PLUG
• 16GA GPT Wire, Right Angle PL-2
• Stripped End/Ring Terminal, 11" -
Sealed Marker Lamp Pigtails
• 6" Long, Ring Terminal Ground, Blunt Cut Wire
• Factory-molded plugs for use with ULTRA-BLUE-SEAL® trailer wiring system
• Double seal resists corrosion
• Fits 2", and 2 1/2" -
GROTE REPLACEMENT LAMP SOCKET PIGTAILS
• Double, Spring Tensioned Contacts, 7 1/2" Long
• Assures positive bulb contact in all types of weather
• Heavy gauge thermoplastic wire with brass -
Slim-Line Marker Lamp Jumper
• Male To Two Double Female -
Deutsch Connector Adaptor Pigtail
• Allows user to adapt aftermarket Grote lamp to OEM harness -
TRUCK-LITE MARKER CLEARANCE LIGHT PLUG
• 18ga GPT Wire, Male Pin Plug
• .180 Bullet Terminal/Ring Terminal, 5.5" -
PICO HEADLIGHT CONNECTOR-GM
• Weather-Pack Seal Connector
• 2-Wire 18ga, Highbeam, GM
• For Use With 9005, 9145, H10, H4352 -
PICO SOCKET BASE-FORD
• Straight Bulb Socket
• 3-Wire 18ga Lead -
TRUCK-LITE STOP/TURN/TAIL HARNESS
• 2 Plug, 68" Crossover Harness For 5010 Series
• Packard Metri-Pack, 48'' Width Connector To ConnectorOut of stock -
GROTE SIDE MARKER LAMP SOCKET 12" LEAD WIRE
• Cornering, license, side marker, stop-tail-turn lamps
• Fore use with bulbs 131, 168, 194, 194A -
GROTE HIGH BEAM HEADLIGHT CONNECTOR
• Weather-pack seal connector
• 2 Wire 16 Gauge 6" Long
• For use with 9006 bulb -
GROTE S-T-T THREE-WIRE PIGTAIL FOR MALE PIN LAMPS
• 6" Long, Ground Return,Slim-Line .180 Male
• O-ring seal resists moisture and corrosionOut of stock -
Adapter Plug
• Female-to-male pin lamp termination, and male-to-female pin lamp termination
• For use with 4" round and oval, S / T / T lamps -
Turtleback® II Double-Seal Lamp Pigtails
• 6" Long, Chassis Ground, Slim-Line .180 Male
• Pigtail for 4680-, 4684-, 4686- and 4687- series lamps
• All connections fit under lamps
• Factory-molded plugs for use -
TRUCK-LITE LED FIT 'N FORGET STOP/TURN/TAIL ADAPTER PLUG
• 16GA GPT Wire, Female PL-3, Fit 'n Forget S.S., 8" -
WELDON S-T-T THREE-WIRE PIGTAIL
• Weather-pack seal connector -
GROTE TWO-WIRE 90° PIGTAIL FOR FEMALE PIN LIGHTS
• 90° construction for reduced clearance applications
• Fits 2" and 2 1/2" round marker lights
• Ring Terminal for Chassis Ground -
GROTE FOG LIGHT CONNECTOR SOCKET
• Weather-pack seal connector
• 2 Wire 18 Gauge 12" Long -
Buyers DOT Turn Signal Equalizer Plug
• Converts incandescent turn signal lights to LED while maintaining proper flash rate.
• Blunt cut leads, 3-Pin Right Angle Male Pl-3 Plug -
DRY FIT 2-Pin CM Connector -
Two Light 9" Y Adapter Pigtail
• Accommodate 6-lamp systems
• For use with 4" round and oval S/T/T lamps
• Molded termination avoids moisture and corrosion buildup
• RetrofitsOut of stock -
Two Light 9" Y Adapter Pigtail
• Accommodate 6-lamp systems
• For use with 4" round and oval S/T/T lamps
• Molded termination avoids moisture and corrosion build up
•Out of stock